Your access to and use of the Daikin web site is subject to the Terms and Conditions and all applicable laws.

CAD CART (0)
  • Cart is empty
The Daikin brand All-aluminum CHPF Cased Horizontal “A” Coils are made for split system air conditioners and heat pumps. Each coil is made of quality galvanized steel with a painted, leather grain-embossed finish. This cabinet is painted Architectural Gray.
  • Check flowrater for cooling and heat pump applications
  • All-aluminum evaporator coil
  • Rust-resistant, high-temperature, thermoplastic drain pans feature a low water-retention design
  • Galvanized, leather grain-embossed finish
  • Horizontal configuration
  • 21" depth for easier attic access
  • Foil-faced insulation covers the internal casing to reduce cabinet condensation
  • UV-resistant drain pan
  • Split-seam front for easy access
  • AHRI certified; ETL listed
Unit of Measure

Nominal Capacity

N/A 1 1/2 to 2 T

Depth

N/A 21 1/4 in

Width

N/A 26 in

Height

N/A 14 in

Liquid Connection

N/A 3/8 in

Suction Connection

N/A 3/4 in

Piston Size

N/A .059 in

Plenum Opening Depth

N/A 19 in

Plenum Opening Height

N/A 13 in

Shipping Weight

N/A 36 lb

N/A

Standard Features

  • All-Aluminum evaporator coil
  • Optimized for use with R-410A refrigerant
  • Some models suitable for use with R-410A or R-22 refrigerant
  • CAPT models feature factory-installed thermal expansion valves for cooling and heat pump applications
  • Check flowrator for cooling and heat pump applications
  • Vertical and horizontal models available
  • 21" depth for easier attic access
  • Split seam front for easy access
  • Foil-faced insulation covers the internal casing to reduce cabinet condensation
  • Galvanized, leather grain-embossed finish
  • Rust resistant, thermoplastic drain pans featuring a low water-retention design
  • DecaBDE-free thermoplastic drain panwith secondary drain connections
  • UV-resistant drain pan
  • AHRI certified; ETL listed

N/A Do not use these coils on oil furnaces or any applications where the temperature on the drain pan may exceed 300°F. If these coils are applied with an oil furnace or another application where high temperatures threaten or jeopardize the durability of the drain pan, you must replace the factory-installed drain pan with a high-temperature drain pan. High-temperature drain pan kits are available as field-installed accessories
For a properly matched system and piston sizing information, refer to Amana piston kit chart of the corresponding outdoor unit.

Your access to and use of the Daikin web site is subject to the Terms and Conditions and all applicable laws.