Your access to and use of the Daikin web site is subject to the Terms and Conditions and all applicable laws.

CAD CART (0) ▾
  • Cart is empty
  1. Request CAD files
Request Information Add to CAD Cart
Whole House System - Inverter Air Conditioner
  • Compatible with the Daikin One+ smart thermostat and other Daikin communicating equipment
  • Up to 17.2 SEER2
  • Side Discharge
  • Compact – The trunk style outdoor unit is perfect when installation space is limited
  • Inverter (variable-speed) Compressor - Ideal indoor comfort and efficiency
  • Low dBa – reclaim outdoor space
  • Quiet-mode – Enhanced acoustical comfort
  • PE Fin Coat – Improved coil life and reliability
  • Swing Compressor – Quiet and dependable
  • Side panel access – Ease of service
  • Lightweight – Easier to handle and install (compared to traditional cube style systems)
Unit of Measure

Cooling Capacity

 N/A 22800 Btu/h2 T

Ambient Temp. Range - Cooling

 N/A 0 to 115 ºF-17.8 to 46.1 ºC

Refrigerant Type

 N/A R-410A

Voltage

 N/A 208 to 230 V

Frequency

 N/A 60 Hz

Number of Phases

 N/A 1

Minimum Circuit Ampacity

 N/A 18.8 A

Max. Overcurrent Protection

 N/A 20 A

Min / Max Volts

 N/A 197/253 V

Electrical Conduit Size

 N/A 1/2 in

System Performance SEER

 N/A 17

Equipment Weight

 N/A 112 lb

Shipping Weight

 N/A 130 lb

Compressor Type

 N/A Swing

Rated Load Amps

 N/A 13.4 A

Horsepower

 N/A 0.09 hp

Full Load Amps

 N/A 1.15 A

Refrigerant Line Size - Liquid Line Size (O.D.)

 N/A 3/8 in

Refrigerant Line Size - Suction Line Size (O.D.)

 N/A 3/4 in

Refrigerant Connection Size - Liquid Line Size (O.D.)

 N/A 3/8 in

Refrigerant Connection Size - Suction Line Size (O.D.)

 N/A 3/4 in

Valve Connection Type

 N/A Front Sealing

Refrigerant Charge

 N/A 76 oz

Expansion Device

 N/A EEV

Superheat at Service Valve

 N/A Auto-control

Subcooling at Service Valve

 N/A 12±1 ºF

Depth

 N/A 13 3/4 in

Width

 N/A 36 5/8 in

Height

 N/A 27 3/8 in

N/A

Standard Features

  • Daikin variable-speed swing compressors
  • Quiet digitally commutated fan motor
  • High-density compressor sound blanket
  • Compatible with Daikin One+ smart thermostat and other Daikin communicating equipment
  • Daikin control algorithmic logic
  • In communicating mode, only two low voltage wires to outdoor unit required
  • Diagnostic indicator lights, seven-segment LED display, and fault code storage
  • Daikin Inside intelligence for diagnostics
  • Field-selectable boost mode increases compressor speed during unusually high loads
  • Field-installed bi-flow filter drier
  • Coil and ambient temperature sensors
  • Suction pressure transducer
  • Sweat connection service valves with easy access to gauge ports
  • AHRI Certified; ETL Listed

Cabinet Features

  • Heavy-gauge galvanized steel cabinet with grille-style sound control side design
  • Custom Ivory white powder-paint finish
  • High corrosion-resistant (ZAM®), unpainted steel bottom frame and legs on 1.5-3-ton models
  • 500-hour salt-spray tested
  • Wire fan discharge grille
  • Top and side maintenance access
  • When properly anchored, meets the 2020 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)

Your access to and use of the Daikin web site is subject to the Terms and Conditions and all applicable laws.