Your access to and use of the Daikin web site is subject to the Terms and Conditions and all applicable laws.

CAD CART (0) ▾
  • Cart is empty
  1. Request CAD files
Request Information Add to CAD Cart
Whole House Heat Pump
  • Up to 15 SEER and 9.0 HSPF
  • Energy-efficient compressor
  • Refrigeration-grade premium copper tubing and aluminum fin condenser coil
  • Time-delay defrost technology
  • Factory-installed in-line filter drier
  • Factory-installed heater band and accumulator
  • Quiet condenser fan motor
  • Heavy-gauge galvanized steel cabinet with sound-control top
  • Baked enamel finish protects the system from the elements
  • AHRI certified; ETL listed
Unit of Measure

Nominal Cooling Capacity

 N/A 30000 Btu/h

Nominal Heating Capacity

 N/A 30000 Btu/h

Sound Level

 N/A 74 dB

Rated Load Amps (RLA)

 N/A 13.5 A

Locked Rotor Amps (LRA)

 N/A 72.5 A

Compressor Type

 N/A Scroll

Horsepower

 N/A 1/6 hp

Full Load Amps (FLA)

 N/A 0.95 A

Refrigerant Type

 N/A R-410A

Refrigerant Charge

 N/A 108 oz

Valve Connection Type

 N/A Sweat

Voltage

 N/A 208 to 230 V

Min / Max Volts

 N/A 197/253 V

Phase

 N/A 1

Frequency

 N/A 60 Hz

Minimum Circuit Ampacity

 N/A 18.6 A

Max. Overcurrent Protection

 N/A 30 A

Electrical Conduit Size

 N/A 1/2" or 3/4"

Equipment Weight

 N/A 171 lb

Shipping Weight

 N/A 182 lb

Liquid Line Size (O.D.)

 N/A 3/8 in

Suction Line Size (O.D.)

 N/A 3/4 in

Liquid Valve Size (O.D.)

 N/A 3/8 in

Suction Valve Size (O.D.)

 N/A 3/4 in

Standard Line Set Length

 N/A 80 ft

Equivalent Length

 N/A 250 ft

Linear Length

 N/A 200 ft

Vertical Length (outdoor below indoor)

 N/A 80 ft

Vertical Length (outdoor above indoor)

 N/A 80 ft

Depth

 N/A 29 in

Width

 N/A 29 in

Height

 N/A 39 1/2 in

System Performance SEER

 N/A 14.0

System Performance EER

 N/A 11.5

System Performance HSPF

 N/A 9.0

N/A

Standard Features

  • Energy Efficient compressor
  • Copper tube/enhanced aluminum fin coil - 5mm diameter on 1.5-3.5T
  • Single-Speed PSC condenser fan motor
  • High density foam compressor sound blanket on 1.5-2.0T
  • Time-delay technology to ensure quiet reliable defrost
  • Factory-installed bi-flow liquid line filter drier
  • Factory-installed suction line accumulator
  • Factory-installed compressor crank case heater
  • Factory-installed high capacity muffler
  • Low-pressure switches
  • Service valves with sweat connections and easy access to gauge ports
  • Fully charged for 15’ of tubing length
  • AHRI Certified; ETL Listed

Cabinet Features

  • Removable grille-style top design compliant with UL 60335-2-40
  • Venturi for increased velocity of airflow
  • Custom Nickel Gray powder-paint finish
  • 500-hour salt-spray tested
  • Wire fan discharge grille
  • Steel louver coil guard
  • Rust-resistant screws
  • Top and side maintenance access
  • Single-panel access to controls with space provided for field-installed accessories
  • When properly anchored, meets the 2020 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)

Your access to and use of the Daikin web site is subject to the Terms and Conditions and all applicable laws.