Print Back
High Efficiency Inverter Air Conditioner
  • ComfortNet™ Compatible
  • Up to 22.5 SEER2
  • Daikin Inside Variable-Speed Compressor
Unit of Measure

Specifications

Maximal Cooling Capacity

 N/A 53000 Btu/h

Compressor Type

 N/A Swing

Compressor - Rated Load Amps

 N/A 28.60 A

Condenser Fan Motor - Horsepower

 N/A 1/2 hp

Condenser Fan Motor - Full Load Amps

 N/A 2.5 A

Valve Connection Type

 N/A Front Seated

Refrigerant Charge

 N/A 246 oz

Superheat at Service Valve

 N/A 7-9°F

Subcooling at Service Valve

 N/A 7-9°F

Voltage

 N/A 208/230 V

Phase

 N/A 1

Minimum Circuit Ampacity

 N/A 31.1 A

Maximum Overcurrent Protection

 N/A 35 A

Min/Max Volts

 N/A 197/253 V

Electrical Conduit Size

 N/A 1/2 or 3/4 in

Frequency

 N/A 60 Hz

Shipping Weight

 N/A 330 lb

Equipment Weight

 N/A 310 lb

System Efficiency Metrics

System Performance SEER

 N/A 20

System Performance EER

 N/A 13

Dimensions

Depth

 N/A 35 1/2 in

Width

 N/A 35 1/2 in

Height

 N/A 41 3/4 in

Liquid Line Size (O.D.)

 N/A 3/8 in

Suction Line Size (O.D.)

 N/A 1 1/8 in

Liquid Valve Size (O.D.)

 N/A 3/8 in

Suction Valve Size (O.D.)

 N/A 7/8 in

Features

N/A

Standard Features

  • Daikin variable-speed swing and scroll compressors
  • High-density compressor sound blanket
  • Compatible with Daikin One+ smart thermostat and other Daikin communicating equipment
  • Daikin control algorithmic logic
  • In communicating mode, only two low voltage wires to outdoor unit required
  • Diagnostic indicator lights, seven-segment LED display, and fault code storage
  • Daikin Inside intelligence for diagnostics
  • Field-selectable boost mode increases compressor speed during unusually high loads
  • Quiet DC outdoor fan motor
  • Field-installed bi-flow filter drier
  • Coil and ambient temperature sensors
  • Suction pressure transducer
  • Sweat connection service valves with easy access to gauge ports
  • AHRI Certified; ETL Listed

Cabinet Features

  • Heavy-gauge galvanized-steel cabinet
  • Removable grille-style top design compliant with UL 60335-2-40
  • Venturi for increased velocity of airflow
  • Custom Nickel Gray powder-paint finish
  • 500-hour salt-spray tested
  • Wire fan discharge grille
  • Steel louver coil guard
  • Top and side maintenance access
  • Single-panel access to controls with space provided for field-installed accessories
  • When properly anchored, meets the 2020 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)