Print Back
Unit of Measure

Specifications

Condenser Fan Motor Horsepower

 N/A 1 hp

Voltage

 N/A 208-230 V

Cooling Capacity

 N/A 114000 Btu/h

Nominal Cooling Capacity (Tons)

 N/A 10

Sound Level

 N/A 84 dB

Compressor Rated Load Amps

 N/A 30.1 A

Compressor Locked Rotor Amps

 N/A 225 A

Condenser Fan Motor Full Load Amps

 N/A 5.6 A

Valve Type

 N/A Sweat

Refrigerant Charge

 N/A 35 oz

Phase

 N/A 3

Minimum Circuit Ampacity

 N/A 43.2 A

Maximum Overcurrent Protection

 N/A 70 A

Min/Max Volts

 N/A 197/253 V

Electrical Conduit Size

 N/A 1/2 or 3/4 in

Series

 N/A DX11S

Refrigerant Used

 N/A R-410A

Shipping Weight

 N/A 334 lb

Dimensions

Depth

 N/A 35 1/2 in

Width

 N/A 35 1/2 in

Height

 N/A 41 1/2 in

Liquid Valve Size O.D.

 N/A 5/8 in

Suction Valve Size O.D.

 N/A 1 3/8 in

Parallel Unit Minimum Clearance

 N/A 24 in

Unit Minimum Clearance

 N/A 12 in

Unit Top Minimum Clearance

 N/A 60 in

Lower Access Panel Depth

 N/A 4 in

Lower Access Panel Height

 N/A 17 in

Lower Access Panel Width

 N/A 7 in

System Efficiency Metrics

System Performance EER

 N/A 11.2

System Performance IEER

 N/A 11.5

Features

N/A Standard Features

  • Energy-efficient compressor
  • Quiet operating top discharge
  • High-efficiency copper tube / aluminum fin coil
  • Brass liquid and suction service valves
  • High- and low-pressure switches
  • Factory-installed filter drier
  • Complies with ASHRAE 90.1-2007
  • AHRI Certified; ETL Listed
Cabinet Features
  • Innovative louvered sound control top design
  • Steel louver coil guard protects the coil from damage and adds strength to unit
  • Bottom pan rails elevate unit above slab
  • Heavy-gauge galvanized-steel cabinet
  • Attractive Nickel Gray powder-paint finish
  • When properly anchored, meets the 2010 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)