Print Back
The Daikin brand AWST air handler is designed to be vertically wall- or stud-mounted. This unit is equipped with a fully adjustable TXV and direct-drive, multi-speed motor. The AWST is housed in a fully insulated, galvanized-steel cabinet. Supports 2023 DOE energy efficiency standards. This product is UL60335 2-40 Compliant.
Unit of Measure

Specifications

Nominal Capacity

 N/A 30000 Btu/h2.5 T

Electric Heat

 N/A 8 kW

Cabinet

 N/A Unpainted

Expansion Device

 N/A Thermal Expansion Valve

Motor

 N/A MS-ECM

Blower Motor Full Load Amps

 N/A 3.9 A

Blower Motor - Horsepower

 N/A 1/2 hp

Shipping Weight

 N/A 109 lb

Electrical Data

Voltage

 N/A 208 to 230 V

Frequency

 N/A 60 Hz

Number of Phases

 N/A 1

Min. Circuit Ampacity (208V)

 N/A 37.8 to 43 A

Max. Overcurrent Device

 N/A 40/45 A

Minimum Voltage

 N/A 197 V

Maximum Voltage

 N/A 253 V

Dimensions

Blower Diameter

 N/A 10 in

Blower Width

 N/A 8 in

Liquid Coil Connections

 N/A 3/8 in

Suction Suction Connection

 N/A 3/4 in

Coil Drain Connection (FPT)

 N/A 3/4 in

Depth

 N/A 21 in

Width

 N/A 24 in

Height

 N/A 36 in

Features

N/A

  • AWST Models: Equipped with a fully adjustable TXV
  • Direct-drive, multi-speed motors allows air volume variation for heating/cooling
  • Sequence-controlled, rust-resistant nickel chromium heating elements of 3, 5, 8, and 10 kW
  • Aluminum tubing coils on all models
  • Cabinet air leakage less than 2.0% at 1.0 inch H₂O when tested in accordance with ASHRAE standard 193
  • Cabinet air leakage less than 1.4% at 0.5 inch H₂O when tested in accordance with ASHRAE standard 193
  • Factory-installed pull-type disconnect
  • Thermoplastic drain pan with bottom primary and secondary drain connections
  • Built-in filter rack (filter included)
  • Large chassis (2½- and 3-ton units) – front return only
  • Small chassis (1½- and 2-ton units) – front or bottom return
  • Wall-hanging bracket provided
  • AHRI Certified; ETL Listed