Print Back
Unit of Measure

Specifications

Variant

 N/A Low NOx

High-Fire Input

 N/A 100000 Btu/h

High-Fire Output

 N/A 96000 Btu/h

Low-Fire Steady-State Input

 N/A 70000 Btu/h

Low-Fire Steady-State Output

 N/A 67200 Btu/h

Maximum CFM

 N/A 2000 ft³/min

Annualized Fuel Utilization Efficiency

 N/A 96 %

Temperature Rise Range

 N/A 35 - 65 ºF

Vent Diameter

 N/A 2 to 3 in

No. of Burners

 N/A 5

Min. Circuit Ampacity

 N/A 13.3 A

Max. Overcurrent

 N/A 20 A

Shipping Weight

 N/A 140 lb

Circulator Blower

Available AC

 N/A 4 to 5 A

Side (D x W)

 N/A 11 x 10

Horsepower

 N/A 1 hp

RPM

 N/A 1075

No. of speeds

 N/A 9

Dimensions

Depth

 N/A 28-3/4 in

Width

 N/A 21 in

Height

 N/A 34 1/2 in

Features

N/A Standard Features

  • Heavy-duty stainless-steel tubular heat exchanger
  • Stainless-steel secondary heat exchanger
  • Two-stage gas valve provides quiet, economical heating
  • Durable Silicon Nitride igniter
  • Quiet two-speed induced draft blower
  • Self-diagnostic control board with constant memory fault history output to a 3-digit 7 segment LED display and push buttons
  • Energy-efficient multi-speed (9-speed tap) ECM blower motor
  • Multiple continuous fan speed options offer quiet air circulation
  • Color-coded low-voltage terminals with provisions for electronic air cleaner and humidifier
  • AHRI Certified; ETL Listed
  • All models comply with CA Low NOx standards
  • Can not be installed in California’s South Coast Air Quality Management District (SCAQMD) and San Joaquin Valley Air Pollution Control District (SJVAPCD).
Cabinet Features
  • Designed for multi-position installation:
    DM96TN: Upflow, horizontal left or right
  • Certified for direct vent (2-pipe) or non-direct vent (1-pipe)
  • Easy-to-install top venting with optional side venting
  • Convenient left or right connection for gas and electrical service
  • Cabinet air leakage (QLeak) ≤ 2%
  • Heavy-gauge steel cabinet with durable finish
  • Fully insulated heat exchanger and blower section
  • Airtight solid bottom or side return with easy-cut tabs for effortless removal in bottom air-inlet applications

Notes

N/A

  • All furnaces are manufactured for use on 115 VAC, 60 Hz, single-phase electrical supply.
  • Gas Service Connection 1/2" FPT
  • Important: Size fuses and wires properly and make electrical connections in accordance with the National Electrical Code and/or all existing local codes.