Print Back
Whole House Gas Furnace
  • 80% AFUE
  • Multi-position installation: upflow / horizontal left or right
  • Self-diagnostic control board continuously monitors the system for consistent reliable operation
  • Durable tubular stainless-steel heat exchanger
  • Quiet multi-speed ECM indoor motor
  • Quiet induced draft blower
  • Durable silicon nitride igniter
  • Heavy-gauge steel cabinet with durable baked-enamel finish
  • Two-stage gas valve
  • Fully insulated heat exchanger and blower section
  • Optional continuous air circulation to keep the air moving throughout the home
Unit of Measure

Specifications

Variant

 N/A Natural Gas

Input Heating Capacity

 N/A 80000 Btu/h

Natural Gas Output

 N/A 64000 Btu/h

LP Gas Output

 N/A 64000 Btu/h

Annualized Fuel Utilization Efficiency (AFUE)

 N/A 80 %

Available AC

 N/A 5 A

Temperature Rise Range

 N/A 30 - 60 ºF

Min. Circuit Ampacity

 N/A 14.8 A

Max. Overcurrent Device

 N/A 15 A

Shipping Weight

 N/A 123 lb

Circulator Blower

Size (D x W)

 N/A 10 x 10

Horsepower

 N/A 1 hp

RPM

 N/A 1075

Speed

 N/A 5

Vent Diameter

 N/A 4 in

No. of Burners

 N/A 4

Dimensions

Filter Size

 N/A 480 in²

Depth

 N/A 28 1/2 in

Width

 N/A 24 1/2 in

Height

 N/A 33-1/2 in

Features

N/A Standard Features

  • Energy-efficient, multi-speed ECM blower motor
  • Heavy-duty aluminized steel dualdiameter, tubular heat exchanger
  • Two-stage convertible gas valve automatically adjust to high or low stage
  • Durable Silicon Nitride igniter
  • Quiet single speed draft inducer
  • Self-diagnostic control board with constant memory fault code
  • Color-coded low-voltage terminals with provisions for electronic air cleaner and humidifier
  • Multi-speed blower motor
  • Low continuous fan speed options offer quiet air circulation
  • California Low NOx emissions models available
  • AHRI Certified; ETL Listed
Cabinet Features
  • Multi-position installation: upflow, horizontal left or right with kit
  • Cabinet air leakage (QLeak) < 2%
  • Convenient left or right connection for gas and electrical service
  • Heavy-gauge steel cabinet with durable baked-enamel finish
  • Fully insulated heat exchanger and blower section

Notes

N/A

  • All furnaces are manufactured for use on 115 VAC, 60 Hz, single-phase electrical supply.
  • Gas Service Connection 1/2” FPT
  • Important: It is required to size overcurrent protection device and wires properly and make electrical connections in accordance with the National Electrical Code and/or all existing local codes.