Print Back
Whole House Heat Pump
  • Up to 17 SEER and 9.5 HSPF
  • Compatible with the Daikin One+ smart thermostat and other Daikin communicating equipment
  • High-efficiency two-stage scroll compressor
  • Copeland® CoreSense advanced diagnostics monitors the system for trouble spots
  • Refrigeration-grade premium copper tubing and aluminum fin condenser coil
  • Acoustically engineered sound control blanket for quiet operation
  • Specialized time-delay defrost technology
  • Factory-installed in-line filter drier
  • Factory-installed heater band and accumulator
  • Heavy-gauge galvanized steel cabinet with sound-control top
  • Baked enamel finish protects the system from the elements
  • AHRI certified; ETL listed
Unit of Measure

Specifications

Nominal Cooling Capacity

 N/A 36000 Btu/h

Nominal Heating Capacity

 N/A 36000 Btu/h

Sound Level

 N/A 73 dB

Rated Load Amps (RLA)

 N/A 14.8 A

Locked Rotor Amps (LRA)

 N/A 84.2 A

Compressor Type

 N/A 2-Stg Scroll

Horsepower

 N/A 1/5 hp

Full Load Amps (FLA)

 N/A 1.0 A

Refrigerant Type

 N/A R-410A

Refrigerant Charge

 N/A 170 oz

Valve Connection Type

 N/A Sweat

Voltage

 N/A 208 to 230 V

Min / Max Volts

 N/A 197/253 V

Phase

 N/A 1

Frequency

 N/A 60 Hz

Minimum Circuit Ampacity

 N/A 24.1 A

Max. Overcurrent Protection

 N/A 40 A

Electrical Conduit Size

 N/A 1/2" or 3/4"

Equipment Weight

 N/A 240 lb

Shipping Weight

 N/A 266 lb

Dimensions

Liquid Line Size (O.D.)

 N/A 3/8 in

Suction Line Size (O.D.)

 N/A 7/8 in

Liquid Valve Size (O.D.)

 N/A 3/8 in

Suction Valve Size (O.D.)

 N/A 7/8 in

Depth

 N/A 35 1/2 in

Width

 N/A 35 1/2 in

Height

 N/A 35 13/16 in

System Efficiency Metrics

System Performance SEER

 N/A 16.0

System Performance EER

 N/A 12.5

System Performance HSPF

 N/A 9.5

Features

N/A

Standard Features

  • Two-Stage Copeland® UltraTech scroll compressor
  • High-density foam compressor sound blanket
  • Compatible with Daikin One+ smart thermostat Daikin One Touch, and other Daikin communicating equipment
  • ComfortAlert™ built in diagnostics
  • Copper tube/enhanced aluminum fin coil - 5mm on 2.0-3.0T
  • Efficient, two-speed ECM condenser fan motor
  • Simple low-voltage wiring to outdoor unit in communicating mode
  • Diagnostic indicator lights and storage of six fault codes
  • Color-coded terminal strip for non-communicating set-up
  • High- and low-pressure switches
  • Time-delay technology with short-cycle protection to ensure quiet, reliable defrost
  • Factory-installed bi-flow liquid-line filter drier
  • Factory-installed suction-line accumulator
  • Factory-installed compressor crankcase heater
  • Factory-installed high-capacity muffler
  • Factory-installed coil and ambient temperature sensors
  • AHRI Certified; ETL Listed

Cabinet Features

  • Grille-style sound control top design
  • Custom Nickel Gray powder-paint finish
  • 500-hour salt-spray tested
  • Wire fan discharge grille
  • Steel louver coil guard
  • Single panel access to controls with space provided for field-installed accessories
  • Sweat connection service valves with easy access to gauge ports
  • When properly anchored, meets the 2020 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)