Print Back
When properly matched and installed, your communicating DZ7TC Heat Pump offers up to 17.2 SEER2 high efficiency performance. The higher the SEER2, the greater the efficiency — and the lower the operating cost compared to lower SEER2 units. In many applications, the efficiency of your DZ7TC can be enhanced by using it in conjunction with a Daikin brand gas furnace or air handler that includes a variable-speed blower motor. This unit features a powder-paint finish over heavy-gauge galvanized steel that provides premium durability and excellent UV protection.
Unit of Measure

Specifications

Nominal Cooling Capacity

 N/A 36000 Btu/h

Nominal Heating Capacity

 N/A 36000 Btu/h

Compressor Type

 N/A 2-Stg Scroll

Refrigerant Type

 N/A R-410A

Valve Connection Type

 N/A Sweat

Voltage

 N/A 208 to 230 V

Min / Max Volts

 N/A 197/253 V

Phase

 N/A 1

Frequency

 N/A 60 Hz

Dimensions

Liquid Line Size (O.D.)

 N/A 3/8 in

Suction Line Size (O.D.)

 N/A 7/8 in

Liquid Valve Size (O.D.)

 N/A 3/8 in

Suction Valve Size (O.D.)

 N/A 7/8 in

Depth

 N/A 35 1/2 in

Width

 N/A 35 1/2 in

Height

 N/A 35 13/16 in

System Efficiency Metrics

Up to SEER2

 N/A 17.5

Up to HSPF2

 N/A 8.2

Features

N/A

Standard Features

  • Two-Stage Copeland® UltraTech scroll compressor
  • High-density foam compressor sound blanket
  • Compatible with Daikin One+ smart thermostat Daikin One Touch, and other Daikin communicating equipment
  • ComfortAlert™ built in diagnostics
  • Copper tube/enhanced aluminum fin coil - 5mm on 2.0-3.0T
  • Efficient, two-speed ECM condenser fan motor
  • Simple low-voltage wiring to outdoor unit in communicating mode
  • Diagnostic indicator lights and storage of six fault codes
  • Color-coded terminal strip for non-communicating set-up
  • High- and low-pressure switches
  • Time-delay technology with short-cycle protection to ensure quiet, reliable defrost
  • Factory-installed bi-flow liquid-line filter drier
  • Factory-installed suction-line accumulator
  • Factory-installed compressor crankcase heater
  • Factory-installed high-capacity muffler
  • Factory-installed coil and ambient temperature sensors
  • AHRI Certified; ETL Listed

Cabinet Features

  • Grille-style sound control top design
  • Custom Nickel Gray powder-paint finish
  • 500-hour salt-spray tested
  • Wire fan discharge grille
  • Steel louver coil guard
  • Single panel access to controls with space provided for field-installed accessories
  • Sweat connection service valves with easy access to gauge ports
  • When properly anchored, meets the 2020 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)