Your access to and use of the Daikin web site is subject to the Terms and Conditions and all applicable laws.

CAD CART (0)
  • Cart is empty
  • Heavy-duty stainless-steel heat exchanger
  • Energy-efficient compressor
  • All-aluminum evaporator coil
  • Flowrater expansion device on 2- to 4-ton units TXV expansion device on 5-ton units
  • Multi-speed ECM blower motor
  • Redundant gas valve with easy conversion to propane
  • Power-assisted combustion
  • Direct spark ignition system includes a microprocessor-based control for the entire ignition sequence, all blower operation, and all safety circuits complete with self-diagnostics
  • This furnace does not comply with the SCAQMD Rule 1111 nor the SJVAPCD Rule 4905 14 ng/J NOx emission limit and therefore is not eligible for installation in California’s South Coast Air Quality Management District (SCAQMD) nor the San Joaquin Valley Air Pollution Control District (SJVAPCD).
  • All models comply with California Low NOx standards.
  • AHRI Certified; ETL Listed
Unit of Measure

Nominal Capacity

2.0 T

Cooling Capacity

23000 Btu/h

Sensible Cooling Capacity

18800 Btu/h

System Performance SEER2

13.4

System Performance EER2

10.6

AHRI Reference

209319519

Heating Capacity Input

60000 Btu/h

Heating Capacity Output

48600 Btu/h

Heating Capacity Low-Fire Output

48600 Btu/h

Sound Level

78 dB

Annualized Fuel Utilization Efficiency (AFUE)

81 %

Temperature Rise Range

30 - 60 °F

No. of Burners

3

Orifice Size Natural

45 in

Orifice Size Propan

1.25 mm

Voltage

208 to 230 V

Phase

1

Frequency

60 Hz

Indoor Blower - Full Load Amps (FLA)

3.8 A

Outdoor Fan - Full Load Amps (FLA)

0.95 A

Outdoor Fan - Rated Load Amps (RLA)

2 A

Total Unit Amps

12.7 A

Min. Circuit Ampacity

21.6 A

Max. Overcurrent Protection

35 A

Shipping Weight

439 lb

Operating Weight

417 lb

Your access to and use of the Daikin web site is subject to the Terms and Conditions and all applicable laws.