Print Back
Multi-Position, Variable Speed Air Handler
  • ComfortNet™ Compatible
  • Variable Speed ECM Blower Motor
  • Inverter-tuned Internal TXV
  • 2 to 5 Tons
Unit of Measure

Specifications

Nominal Cooling Capacity (Tons)

 N/A 4 T

Nominal Cooling Capacity

 N/A 48000 Btu/h

Voltage

 N/A 208/240 V

Phase

 N/A 1

Minimal Circuit Ampacity

 N/A 6.5 A

Maximal Overcurrent Device

 N/A 15 A

Frequency

 N/A 60 Hz

Minimum Voltage (AC)

 N/A 197 V

Maximum Voltage (AC)

 N/A 253 V

Blower Motor - Full Load Amps (FLA)

 N/A 5.2 A

Blower Motor - Horsepower

 N/A 3/4 hp

Shipping Weight

 N/A 158 lb

Dimensions

Blower Diameter

 N/A 10 in

Blower Width

 N/A 10 in

Coil Drain Connection (FPT)

 N/A 3/4 in

Service Valve Liquid

 N/A 3/8 in

Service Valve Suction

 N/A 7/8 in

Depth

 N/A 21 in

Width

 N/A 21 in

Height

 N/A 58 in

Features

N/A

  • Internal factory-installed thermal expansion valves for cooling and heat pump applications
  • Variable-speed ECM blower motor
  • Compatible with Daikin One+ smart thermostat and other Daikin communicating equipment
  • Auto configuration of the airflow and tonnage in communicating mode
  • All-aluminum evaporator coil
  • Provides constant CFM over a wide range of static pressure conditions independent of duct system
  • CFM indicator
  • Fault recall of six most recent faults
  • Provides adjustable low CFM for efficient fan-only operation
  • Improved humidity and comfort control
  • Built-in compatibility with multi-stage heat pump and cooling applications
  • AHRI certified; ETL listed
  • Cabinet air leakage less than 2.0% at 1.0 inch H2O when tested in accordance with ASHRAE standard 193
  • Cabinet air leakage less than 1.4% at 0.5 inch H2O when tested in accordance with ASHRAE standard 193
  • 3 kW – 25 kW electric heater kits
  • Horizontal or vertical configuration capabilities
  • 21” depth for easier attic access
  • DecaBDE-free thermoplastic drain pan with secondary drain connections
  • Screw-less sides and back helps to reduce condensation when installed in humid locations
  • Foil-faced insulation covers the internal casing to reduce cabinet condensation
  • Galvanized, leather grain-embossed finish
  • Glue-less cabinet insulation retention
  • Tool-less filter access