Print Back
The Daikin brand All-aluminum CHPE Cased Horizontal "A" Coils are made for the Daikin Fit system. Each coil is made of quality galvanized steel with a painted, leather grain-embossed finish. This cabinet is painted Architectural Gray.
  • Electronic Expansion Valve (EEV) models feature:
    • - ComfortNet™ communicating system compatible
      - Cooling and heat pump applications
      - Fault recall of six most recent faults
  • All-aluminum evaporator coil
  • Galvanized and leather grain-embossed finish
  • Rust-resistant and high-temperature and thermoplastic drain pans feature a low water-retention design
  • Dedicated Horizontal configuration
  • 21 inch depth for easier attic access
  • Foil-faced insulation covers the internal casing to reduce cabinet condensation
  • UV-resistant drain pan
  • Compatible with the Daikin Fit system only
  • Split-seam front for easy access
  • AHRI certified; ETL listed
Unit of Measure

Specifications

Nominal Capacity

N/A 2 to 2 1/2 T

Expansion Device

N/A Electronic Expansion Valve

Refrigerant

N/A R-410A

Shipping Weight

N/A 62 lb

Dimensions

Depth

N/A 21 1/8 in

Width

N/A 26 in

Height

N/A 21 in

Plenum Opening Depth

N/A 19 in

Plenum Opening Height

N/A 20 in

Liquid Connection

N/A 3/8 in

Suction Connection

N/A 3/4 in

Features

N/A

  • All-Aluminum evaporator coil
  • Optimized for use with R-410A refrigerant
  • Some models suitable for use with R-410A or R-22 refrigerant
  • Factory-installed electronic expansion valve (EEV) for precise refrigerant control
  • Compatibility with Daikin One+ smart thermostat and other Daikin communicating equipment
  • Cooling and heat pump applications
  • Fault recall of six most recent faults
  • Check flowrator for cooling and heat pump applications
  • Vertical and horizontal models available
  • 21" depth for easier attic access
  • Foil-faced insulation covers the internal casing to reduce cabinet condensation
  • Galvanized, leather grain-embossed finish
  • Rust resistant, thermoplastic drain pans featuring a low water-retention design
  • DecaBDE-free thermoplastic drain pan with secondary drain connections
  • UV-resistant drain pan
  • AHRI certified; ETL listed

Notes

N/A Do not use these coils on oil furnaces or any applications where the temperature on the drain pan may exceed 300° F. If these coils are applied with an oil furnace or another application where high temperatures threaten or jeopardize the durability of the drain pan, you must replace the factory-installed drain pan with a high-temperature drain pan. High-temperature drain pan kits are available as field-installed accessories.