Print Back
  • Combines cooling with heat pump and gas heating for optimal year-long performance
  • High-efficiency scroll compressor
  • Heavy-duty stainless-steel tubular heat exchanger
  • Multi-Speed ECM indoor blower motor
  • All-aluminum evaporator coil
  • Copper tube / aluminum fin coil
  • Two-stage gas valve; natural gas with easy conversion to propane with accessory kit
  • Power-assisted combustion
  • Loss-of-charge protection
  • Direct spark ignition system with a microprocessorbased control for the entire ignition sequence
  • All models comply with California Low NOx standards.
  • AHRI Certified; ETL Listed
Unit of Measure

Specifications

Cooling Capacity

 N/A 34000 Btu/h

Sensible Cooling Capacity

 N/A 27240 Btu/h

System Performance SEER2

 N/A 13.4

System Performance EER2

 N/A 10.6

AHRI Number

 N/A 209319581

Heating Capacity (47°F)

 N/A 34400 Btu/h

Heating Capacity (17°F)

 N/A 21300 Btu/h

System Performance COP (47°F)

 N/A 3.16

System Performance COP (17°F)

 N/A 2.33

System Performance HSPF2

 N/A 6.7

Sound Level

 N/A 76 dB

Voltage

 N/A 208 to 230 V

Frequency

 N/A 60 Hz

Phase

 N/A 1

Total Unit Amps

 N/A 20.0 A

Min. Circuit Ampacity

 N/A 25.1 A

Max. Overcurrent Protection

 N/A 40 A

Shipping Weight

 N/A 460 lb

Operating Weight

 N/A 440 lb

Gas Heating

High-Fire Input

 N/A 80000 Btu/h

High-Fire Output

 N/A 65000 Btu/h

Low-Fire Input

 N/A 60000 Btu/h

Low-Fire Output

 N/A 49000 Btu/h

Annualized Fuel Utilization Efficiency (AFUE)

 N/A 81 %

Temperature Rise Range

 N/A 35 - 65 °F

No. of Burners

 N/A 4

Orifice Size Natural

 N/A 45 in

Orifice Size Propan

 N/A 1.25 mm

Primary Limit Setting

 N/A 150 ºF

Auxiliary Limit Setting

 N/A 150 ºF

Roll-out Limit Setting

 N/A 350 ºF

Evaporator Coil

Face Area

 N/A 4.3 ft²

Rows Deep

 N/A 4

Fins per Inch

 N/A 14

Expansion Device (Orifice Diameter)

 N/A 0.068

Filter Size

 N/A 4.2 ft²

Drain Size (NPT)

 N/A 3/4 in

Refrigerant Charge - R-410A

 N/A 110 oz

Evaporator Motor

Evaporator Motor Type

 N/A EEM

Wheel (D x W)

 N/A 10 x 9

No. Of Speed

 N/A 5

Horsepower

 N/A 1/2 hp

Full Load Amps (FLA)

 N/A 1.86 A

Motor Speed Tap (Cooling and Heat Pump)

 N/A T4

RPM (Cooling and Heat Pump)

 N/A 880

Nominal CFM (Cooling and Heat Pump)

 N/A 1200 ft³/min

Condenser Coil

Face Area

 N/A 12.2 ft²

Rows Deep

 N/A 2

Fins per Inch

 N/A 16

Expansion Device (Orifice Diameter)

 N/A 0.061

Condenser Motor / Fan

Fan Diameter

 N/A 22 in

Fan Blades

 N/A 3

Outdoor Nominal

 N/A 2500 ft³/min

Horsepower

 N/A 1/4 hp

RPM

 N/A 837

Full Load Amps (FLA)

 N/A 1.5 A

Compressor

Type

 N/A Scroll

Stage

 N/A Single

Rated Load Amps (RLA)

 N/A 16.0 A

Locked Rotor Amps (LRA)

 N/A 91.9 A

Dimensions

Entrance Size Power Supply

 N/A 1 1/8 in

Entrance Size Control Voltage

 N/A 7/8 in

Depth

 N/A 47 in

Width

 N/A 51 in

Height

 N/A 34 3/4 in

Features

N/A

Standard Features

  • Combines cooling with heat pump and gas heating for optimal year-long performance
  • High-efficiency scroll compressor
  • Multi-Speed ECM indoor blower motor
  • All-aluminum evaporator coil
  • Copper tube / aluminum fin coil
  • Heavy-duty stainless-steel tubular heat exchanger
  • Two-stage gas valve; natural gas with easy conversion to propane with accessory kit
  • Power-assisted combustion
  • Loss-of-charge protection
  • Direct spark ignition system with a microprocessorbased control for the entire ignition sequence
  • All blower operation and all safety circuits complete with self-diagnostics
  • This furnace does not comply with the SCAQMD Rule 1111 nor the SJVAPCD Rule 4905 14 ng/J NOx emission limit and therefore is not eligible for installation in California’s South Coast Air Quality Management District (SCAQMD) nor the San Joaquin Valley Air Pollution Control District (SJVAPCD).
  • All models comply with California Low NOx standards
  • AHRI Certified; ETL Listed

Cabinet Features

  • Fully insulated heavy-gauge, zinc-coated steel cabinet with UV-resistant powder-paint finish
  • Compressor sound blanket
  • Louvered metal panel condenser coil protection
  • Aluminum foil-facing internal insulation reinforced with fiberglass scrim
  • Horizontal or downflow application
  • Convenient access panels
  • One roof curb fits all units
  • Bottom, 2” high base rails for easy handling
  • All models fit a standard-size pick-up truck
  • When properly anchored, meets the 2020 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)