Print Back
  • Heavy-duty stainless-steel heat exchanger
  • Energy-efficient scroll compressor
  • Multi-Speed ECM indoor blower motor
  • Single-stage gas valve
  • All-aluminum evaporator coil
  • Flowrater expansion device on 2- to 4-ton units
  • TXV expansion device on 5-ton units
  • Power-assisted combustion
  • AHRI Cerified
  • ETL Listed
Unit of Measure

Specifications

Cooling Capacity

N/A 23000 Btu/h2 T

Sensible Cooling Capacity

N/A 18800 Btu/h

Seasonal Energy Efficiency Rating SEER2

N/A 13.4

EER2

N/A 10.6

Decibels

N/A 78 dB

AHRI Reference #s

N/A 209319522

Refrigerant Type

N/A R-410A

Weight

N/A 435 lb

Shipping Weight

N/A 435 lb

Heating Capacity

Heating Capacity - Input

N/A 40000 Btu/h

Heating Capacity - Output

N/A 31000 Btu/h

AFUE

N/A 81 %

Temperature Rise Range

N/A 20 to 50 ºF

No. of Burners

N/A 1

Evaporator Motor

Type

N/A ECM

Wheel (D x W)

N/A 10 x 8 in

Motor Indoor Nominal CFM

N/A 800 ft³/min

No. Of Speed

N/A 5

Horsepower

N/A 1/2 hp

Evaporator Coil

Face Area

N/A 4.35 ft²

Rows Deep

N/A 3

Fins per Inch

N/A 14

Piston Size (Cooling)

N/A 0.057

Drain Size (NPT)

N/A 3/4 in3/4

Refrigerant Charge

N/A 75 oz

Condenser Fan / Coil

Horsepower

N/A 1/6 hp

RPM

N/A 815

Fan Diameter

N/A 22 in

Fan Blades

N/A 3

Outdoor Nominal CFM

N/A 2150 ft³/min

Face Area

N/A 12.29 ft²

Rows Deep

N/A 1

Fins per Inch

N/A 27

Compressor

Quantity

N/A 1

Type

N/A Scroll

Stage

N/A Single

Rated Load Amps

N/A 13.5 A

Locked Rotor Amps

N/A 58.3 A

Electrical Data

Voltage

N/A 208 to 230 V

Number of Phases

N/A 1

Frequency

N/A 60 Hz

Indoor Blower - Full Load Amps

N/A 3.8 A

Outdoor Fan - Full Load Amps

N/A 0.95 A

Outdoor Fan - Locked Rotor Amps

N/A 2.0 A

Min. Circuit Ampacity

N/A 21.6 A

Max. Overcurrent Protection

N/A 35 A

Entrance Size Power Supply

N/A 1 1/8 in

Entrance Size Control Voltage

N/A 7/8 in

Dimensions

Depth

N/A 51 in

Width

N/A 47 in

Height

N/A 34 1/2 in

Features

N/A Standard Features

  • Heavy-duty stainless-steel heat exchanger
  • Energy-efficient scroll compressor
  • Multi-Speed ECM indoor blower motor
  • Single-stage gas valve
  • All-aluminum evaporator coil
  • Flowrater expansion device on 2- to 4-ton units
  • TXV expansion device on 5-ton units
  • Power-assisted combustion
  • Eligible for installation in California’s South Coast Air Quality Management District (SCAQMD) and San Joaquin Valley Air Pollution Control District (SJVUAPCD). For California’s South Coast Air Quality Management District (SCAQMD) only: This furnace complies with the SCAQMD Rule 1111 14ng/j NOx emission limit.
  • AHRI Cerified
  • ETL Listed
Cabinet Features
  • Fully insulated heavy-gauge, zinc-coated steel cabinet with UV-resistant powder-paint finish
  • Horizontal or downflow application
  • Aluminum foil-facing internal insulation reinforced with fiberglass scrim
  • Compressor sound blanket
  • Convenient access panels
  • One roof curb fits all units
  • One foot print: two heights
  • Bottom, 2" high base rails for easier handling
  • One footprint; two heights
  • When properly anchored, meets the 2020 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)