Print Back
Light Commercial Rooftop packaged unit gas electric

Daikin Packaged units are designed with an easier and faster installation in mind for both new construction and retrofit. Built for comfort cooling applications in normal heating, ventilating, and air conditioning. Designed on a variety of fuels such AC only, Gas Electric and Heat Pump to fit on most types of applications, at different static and efficiency requirements.
Capacity range from 6, 7.5-12.5 tons features:
  • Heat exchanger with
more
Unit of Measure

Specifications

Model Type

 Gas/Electric Unit

Nominal Heating Capacity

 90000 Btu/h

Cooling Capacity

 57000 Btu/h5 T

System Performance EER

 11.5

System Performance IEER

 14.0

Heat Range

 Low

No. of Burners

 4

High Stage Input

 90 Btu/h

High Stage Output

 72 Btu/h

Low Stage Input

 67.5 Btu/h

Low Stage Output

 54 Btu/h

Thermal Efficiency (T.E.)

 80

High Stage Temperature Rise Range

 25 to 55 ºF

Low Stage Temperature Rise Range

 20 to 50 ºF

Operating Weight

 663 lb

Shipping Weight

 709 lb

Evaporator Motor / Coil

Motor Type

 Belt Drive

External Static Pressure (ESP)

 Standard

Wheel Dia. x Width

 12 x 10 in

Indoor Nominal CFM

 1640

Evaporator Motor - RPM

 1760

Evaporator Motor Horsepower

 1.0 hp

Filter Size

 20 x 25 x 2 (2) in

Drain Size (NPT)

 3/4 in

R410A Refrigerant Charge

 111 oz

Evaporator Coil - Face Area

 6.4 ft²

Evaporator Coil - Rows Deep

 4

Evaporator Coil - Fins per Inch

 16

Condenser Fan / Coil

Quantity of Condenser Fan Motors

 1

RPM (High/Low stage)

 1122

Outdoor Horsepower

 0.33 hp

Diameter

 22 in

No. of Fan Blades

 3

Condenser Coil Face Area

 17.1 ft²

Rows Deep

 2

Fins per Inch

 28

Compressor

Quantity

 1

Type

 Scroll

Stage

 1

Rated Load Amps

 15.9 A

Locked Rotor Amps

 110.0 A

Electrical Data

Voltage

 208-230 V

Number of Phases

 3

Frequency

 60 Hz

Indoor Blower FLA

 3.2 A

Max External Static

 0.8 inWc

Outdoor Fan FLA

 2 A

Min. Circuit Ampacity

 25.1/25.1 A

Max. Overcurrent Protection

 40/40 A

Power Supply Conduit Hole Diameter

 1.125 in

Low-Voltage Conduit Hole Diameter

 0.5 in

Dimensions

Depth

 74 in

Width

 48-5/16 in

Height

 39 7/8 in

Features

N/A

  • Standard and High efficiency lines available
  • Unit sizes from 3 up to 25 tons
  • Voltage power input available at 208-230/1, 208-230/3, 460/3 and 575/3.
  • ECM direct drive and Belt drive available
  • Roof curb direct fit on a wide variety of existing units on the field
  • Heat exchanger wrinkle bend technology
  • Large offering of factory and field accessories
  • Single and two stage cooling and heating capabilities
  • 5 years warranty on all parts, and 20 years heat exchanger warranty