Print Back
Unit of Measure

Specifications

Compressor Type

N/A Scroll

Condenser Fan Motor Horsepower

N/A 1/4 hp

Frequency

N/A 60 Hz

Voltage

N/A 460 V

Cooling Capacity

N/A 56500 Btu/h

Heating Capacity

N/A 59000 Btu/h

Sound Level

N/A 75 dB

Compressor Rated Load Amps

N/A 7.8 A

Compressor Locked Rotor Amps

N/A 52.0 A

Condenser Fan Motor Full Load Amps

N/A 0.80 A

Valve Connection Type

N/A Sweat

Refrigerant Charge

N/A 245 oz

Shipped with Orifice Size

N/A 0.088 A

Phase

N/A 3

Minimum Circuit Ampacity

N/A 10.6 A

Maximum Overcurrent Protection

N/A 15 A

Min/Max Volts

N/A 414/506 V

Nominal Cooling Capacity (Tons)

N/A 5

Series

N/A DZ14S

Refrigerant Used

N/A R-410A

Shipping Weight

N/A 261 lb

Dimensions

Depth

N/A 35 1/2 in

Width

N/A 35 1/2 in

Height

N/A 34-1/4 in

Liquid Line Size O.D.

N/A 3/8 in

Suction Line Size O.D.

N/A 1 1/8 in

Liquid Valve Size O.D.

N/A 3/8 in

Suction Valve Size O.D.

N/A 7/8 in

Electrical Conduit Size

N/A 1/2 or 3/4 in

Parallel Unit Minimum Clearance

N/A 24 in

Unit Minimum Clearance

N/A 12 in

Unit Top Minimum Clearance

N/A 60 in

Lower Access Panel Depth

N/A 4 in

Lower Access Panel Height

N/A 17 in

Lower Access Panel Width

N/A 7 in

System Efficiency Metrics

System Performance SEER

N/A 14.0

Features

N/A Standard Features

  • R-410A chlorine-free refrigerant
  • Energy-efficient scroll compressor
  • Low-pressure switch
  • Liquid refrigerant return protection
  • Factory-installed, bi-flow liquid-line filter drier
  • Service valves with sweat connections and easy-access gauge ports
  • Copper tube/enhanced aluminum fin coil
  • Reliable time-initiated, temperatureterminated defrost control
  • Contactor with lug connection
  • Ground lug connection
  • Complies with ASHRAE Standard 90.1
  • AHRI Certified; ETL Listed
Cabinet Features
  • Innovative louvered sound control top design
  • Steel louver coil guard
  • Heavy-gauge galvanized-steel cabinet
  • Attractive Nickel Gray powder-paint finish
  • Top and side maintenance access
  • Service ports and controls are accessible while unit is operating
  • When properly anchored, meets the 2010 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)