Print Back
Multi-Position, Variable Speed Air Handler
  • ComfortNet™ Compatible
  • Variable Speed ECM Blower Motor
  • Inverter-tuned Internal EEV
  • 2 to 5 Tons
Unit of Measure

Specifications

Nominal Capacity (Tons)

4 T

Nominal Capacity

48000 Btu/h

Voltage

208/230 V

Phase

1

Minimal Circuit Ampacity

6.5 A

Maximal Overcurrent Device

15 A

Frequency

60 Hz

Minimum Voltage (AC)

253 V

Maximum Voltage (AC)

197 V

Blower Motor - Full Load Amps (FLA)

5.2 A

Blower Motor - Horsepower

3/4 hp

Supply Airflow

1380 CFM

Shipping Weight

150 lb

Dimensions

Blower Diameter

12 in

Blower Width

10 5/8 in

Depth

21 in

Overall Width

24 1/2 in

Overall Height

53 7/16 in

Features

N/A

  • Electronic Expansion Valve (EEV) for cooling and heat pump applications.
  • 7mm evaporator coil tube size
  • Variable-speed ECM blower motor
  • Compatible with Daikin One+ smart thermostat and other Daikin communicating equipment
  • Provides constant CFM over a wide range of static pressure conditions independent of duct system
  • CFM indicator
  • Thermostat provides adjustable low CFM for efficient fan-only operation
  • All-aluminum evaporator coil
  • Fault recall of six most recent faults
  • Improved humidity and comfort control
  • AHRI certified; ETL listed
  • Cabinet air leakage less than 2.0% at 1.0 inch H₂O when tested in accordance with ASHRAE standard 193
  • Cabinet air leakage less than 1.4% at 0.5 inch H₂O when tested in accordance with ASHRAE standard 193
  • 3 kW – 25 kW electric heater kits
  • Horizontal or vertical configuration capabilities
  • 21" depth for easier attic access
  • DecaBDE-free thermoplastic drain pan with secondary drain connections
  • Screw-less sides and back helps to reduce condensation when installed in humid locations
  • Foil-faced insulation covers the internal casing to reduce cabinet condensation
  • Galvanized, leather grain-embossed finish
  • Glue-less cabinet insulation retention
  • Tool-less filter access