Print Back
The Daikin brand CSCF Horizontal Slab Evaporator Coils are made for split system air conditioners and heat pumps. This unit features a check flowrater expansion device and rust resistant, high-temperature, thermoplastic drain pan. Each coil’s cabinet has a quality, galvanized-steel finish.
  • Check flowrater for cooling and heat pump applications
  • All-aluminum evaporator coil
  • Rust-resistant, high-temperature, thermoplastic drain pan with secondary drain connection
  • Foil-faced insulation covers the internal casing to reduce cabinet condensation
  • Compact, versatile, right or left horizontal position
  • Copper sweat connections
  • UV-resistant drain pan
  • AHRI certified; ETL listed
Unit of Measure

Specifications

Nominal Capacity

 N/A 1 1/2 to 2 T

Evaporator Coil Face Area

 N/A 3 1/3 ft²

Depth

 N/A 25 1/2 in

Width

 N/A 12 in

Height

 N/A 25 in

Liquid Connection

 N/A 3/8 in

Suction Connection

 N/A 3/4 in

Piston Size

 N/A .059 in

Plenum Opening Depth

 N/A 16 in

Plenum Opening Height

 N/A 21 in

Shipping Weight

 N/A 43 lb

Features

N/A

Standard Features

  • All-Aluminum evaporator coil
  • Optimized for use with R-410A refrigerant
  • Some models suitable for use with R-410A or R-22 refrigerant
  • CAPT models feature factory-installed thermal expansion valves for cooling and heat pump applications
  • Check flowrator for cooling and heat pump applications
  • Vertical and horizontal models available
  • 21" depth for easier attic access
  • Split seam front for easy access
  • Foil-faced insulation covers the internal casing to reduce cabinet condensation
  • Galvanized, leather grain-embossed finish
  • Rust resistant, thermoplastic drain pans featuring a low water-retention design
  • DecaBDE-free thermoplastic drain panwith secondary drain connections
  • UV-resistant drain pan
  • AHRI certified; ETL listed

Notes

N/A Do not use these coils on oil furnaces or any applications where the temperature on the drain pan may exceed 300°F. If these coils are applied with an oil furnace or another application where high temperatures threaten or jeopardize the durability of the drain pan, you must replace the factory-installed drain pan with a high-temperature drain pan. High-temperature drain pan kits are available as field-installed accessories
For a properly matched system and piston sizing information, refer to Amana piston kit chart of the corresponding outdoor unit.