Your access to and use of the Daikin web site is subject to the Terms and Conditions and all applicable laws.

CAD CART (0)
  • Cart is empty
The Daikin brand ACSF Electric Heat air handler is designed to be ceiling-mounted. It has galvanized steel construction and quiet operation. This unit is equipped with a factory installed flowrator and direct-drive, multi-speed motor. This product is UL60335 2-40 Compliant.
Unit of Measure

Cooling Capacity

N/A 24000 Btu/h2 T

Blower Motor Full Load Amps

N/A 2 A

Blower Motor - Horsepower

N/A 1/4 hp

Refrigerant Type

N/A R410A or R22

Electric Heat

N/A 8 kW25000 Btu/h

Shipping Weight

N/A 79 lb

Blower Diameter

N/A 6.7 in

Blower Width

N/A 8.06 in

Depth

N/A 21 in

Width

N/A 49 1/4 in

Height

N/A 10 in

Coil Drain Connetion

N/A 3/4 in

Liquid Connection

N/A 3/8 in

Suction Connection

N/A 3/4 in

Voltage

N/A 208 to 230 V

Number of Phases

N/A 1

Frequency

N/A 60 Hz

Min. Circuit Ampacity (208V)

N/A 44 A

Min. Circuit Ampacity (230V)

N/A 38.6 A

Max. Overcurrent Device (208V)

N/A 40 A

Max. Overcurrent Device (230V)

N/A 45 A

Minimum Voltage

N/A 197 V

Maximum Voltage

N/A 253 V

N/A

  • All-Aluminum tube/aluminum fin coil
  • Direct-drive, resilient-mount, multi-speed motor
  • Sequence-controlled and rust-resistant nickel chromium heating elements of 5, 6, 8 and 10 kW
  • High-efficiency evaporator coil
  • Quiet operation
  • AHRI Certified; ETL Listed
  • Primary/secondary drain connection in a high-temperature plastic drain pan
  • Suitable for free-return installation (non-ducted return air)
  • Galvanized-steel construction
  • Factory-installed pull-type disconnect
  • Easy service access

Your access to and use of the Daikin web site is subject to the Terms and Conditions and all applicable laws.