Your access to and use of the Daikin web site is subject to the Terms and Conditions and all applicable laws.

CAD CART (0)
  • Cart is empty
Whole House Packaged Dual-Fuel Unit
  • Combines cooling with heat pump and gas heating for optimal year-long performance
  • High-efficiency scroll compressor
  • Heavy-duty stainless-steel tubular heat exchanger
  • Multi-Speed ECM indoor blower motor
  • All-aluminum evaporator coil
  • Copper tube / aluminum fin coil
  • Two-stage gas valve; natural gas with easy conversion to propane with accessory kit
  • Power-assisted combustion
  • Loss-of-charge protection
  • AHRI Certified; ETL Listed
  • Direct spark ignition system with a microprocessorbased control for the entire ignition sequence
  • All blower operation and all safety circuits complete with self-diagnostics
  • For installation in California’s South Coast Air Quality Management District (SCAQMD) only: This furnace does not meet the SCAQMD Rule 1111 14 ng/J NOx emission limit, and thus is subject to a mitigation fee of up to $450. This furnace is not eligible for the SCAQMD Clean Air Furnace Rebate Program: www.CleanAirFurnaceRebate.com.
  • Fully insulated heavy-gauge, zinc-coated steel cabinet with UV-resistant powder-paint finish
  • Compressor sound blanket
  • Louvered metal panel condenser coil protection
  • Aluminum foil-facing internal insulation reinforced with fiberglass scrim
  • Horizontal or downflow application
  • Convenient access panels
  • One roof curb fits all units
  • Bottom, 2” high base rails for easy handling
  • All models fit a standard-size pick-up truck
  • When properly anchored, meets the 2017 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)
Unit of Measure

Cooling Capacity

N/A 23800 Btu/h

Sensible Cooling Capacity

N/A 19300 Btu/h

System Performance SEER

N/A 14.5

System Performance EER

N/A 12.0

AHRI Number

N/A 8032961

Heating Capacity (47°F)

N/A 23800 Btu/h

Heating Capacity (17°F)

N/A 13000 Btu/h

System Performance COP (47°F)

N/A 3.6

System Performance COP (17°F)

N/A 2.3

System Performance HSPF

N/A 8.0

Sound Level

N/A 76 dB

Voltage

N/A 208 to 230 V

Frequency

N/A 60 Hz

Phase

N/A 1

Total Unit Amps

N/A 18.0 A

Min. Circuit Ampacity

N/A 21.2 A

Max. Overcurrent Protection

N/A 30 A

Shipping Weight

N/A 440 lb

Operating Weight

N/A 420 lb

High-Fire Input

N/A 60000 Btu/h

High-Fire Output

N/A 49000 Btu/h

Low-Fire Input

N/A 45000 Btu/h

Low-Fire Output

N/A 36000 Btu/h

Annualized Fuel Utilization Efficiency (AFUE)

N/A 81 %

Temperature Rise Range

N/A 35 - 65 °F

No. of Burners

N/A 3

Orifice Size Natural

N/A 45 in

Orifice Size Propan

N/A 1.25 mm

Primary Limit Setting

N/A 160 ºF

Auxiliary Limit Setting

N/A 150 ºF

Roll-out Limit Setting

N/A 300 ºF

Face Area

N/A 4.3 ft²

Rows Deep

N/A 3

Fins per Inch

N/A 16

Expansion Device (Orifice Diameter)

N/A 0.059

Filter Size

N/A 2.7 ft²

Drain Size (NPT)

N/A 3/4 in

Refrigerant Charge - R-410A

N/A 120 oz

Evaporator Motor Type

N/A EEM

Wheel (D x W)

N/A 10 x 8

No. Of Speed

N/A 5

Horsepower

N/A 1/2 hp

Full Load Amps (FLA)

N/A 4.10 A

Motor Speed Tap (Cooling and Heat Pump)

N/A T4

RPM (Cooling and Heat Pump)

N/A 755

Nominal CFM (Cooling and Heat Pump)

N/A 850 ft³/min

Face Area

N/A 12.2 ft²

Rows Deep

N/A 2

Fins per Inch

N/A 16

Expansion Device (Orifice Diameter)

N/A 0.045

Fan Diameter

N/A 22 in

Fan Blades

N/A 3

Outdoor Nominal

N/A 2100 ft³/min

Horsepower

N/A 1/6 hp

RPM

N/A 815

Full Load Amps (FLA)

N/A 1.1 A

Type

N/A Scroll

Stage

N/A Single

Rated Load Amps (RLA)

N/A 12.8 A

Locked Rotor Amps (LRA)

N/A 58.3 A

Entrance Size Power Supply

N/A 1 1/8 in

Entrance Size Control Voltage

N/A 7/8 in

Depth

N/A 47 1/2 in

Width

N/A 51 1/2 in

Height

N/A 35 in

N/A

Standard Features

  • Combines cooling with heat pump and gas heating for optimal year-long performance
  • Durable, corrosion-resistant T-140 aluminized steel tubular heat exchanger
  • Energy-efficient scroll compressor
  • Heavy-duty aluminized-steel heat exchanger
  • Multi-speed ECM indoor blower motor
  • Copper tube/aluminum fin coil
  • All-aluminum evaporator coil
  • Two-stage gas valve; natural gas with easy conversion to propane with accessory kit
  • Power-assisted combustion
  • Loss-of-charge protection
  • Direct spark ignition system includes a microprocessor-based control for the entire ignition sequence
  • All blower operation and all safety circuits complete with self-diagnostics
  • All models comply with California Low NOx emission standards
  • AHRI Certified; ETL Listed

Cabinet Features

  • Fully insulated heavy-gauge, zinc-coated steel cabinet with UV-resistant powder-paint finish
  • Louvered metal panel condenser coil protection
  • Aluminum foil-facing internal insulation reinforced with fiberglass scrim
  • Compressor sound blanket
  • Convenient access panels
  • One roof curb fits all units
  • Bottom, 2” high base rails for easy handling
  • All models fit a standard-size pick-up truck
  • When properly anchored, meets the 2010 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)
  • Meets cabinet air leakage requirements when tested in accordance with ASHRAE standard 193
  • One footprint for all tonnages

Your access to and use of the Daikin web site is subject to the Terms and Conditions and all applicable laws.