Your access to and use of the Daikin web site is subject to the Terms and Conditions and all applicable laws.

CAD CART (0) ▾
  • Cart is empty
  1. Request CAD files
Request Information Add to CAD Cart
Whole House Packaged Heat Pump
  • Energy-efficient compressor with internal relief valve
  • Multi-speed ECM indoor blower motor
  • Quiet horizontal discharge
  • Copper tube/corrosion-resistant fin
  • Totally enclosed, permanently lubricated condenser fan motor
  • Fully charged system
  • Electric heat kit available as a field-installed option
  • Compressor sound blanket
  • AHRI Certified; ETL listed
  • Heavy-gauge galvanized-steel cabinet with attractive Nickel Gray powder-paint finish
  • Aluminum foil-facing internal insulation reinforced with fiberglass scrim
  • Cabinet air leakage less than 2.0% at 1.0 inch H₂O when tested in accordance with ASHRAE standard 193
  • Cabinet air leakage less than 1.4% at 0.5 inch H₂O when tested in accordance with ASHRAE standard 193
  • Fully insulated blower compartment has convenient access panels
  • Louvered condenser coil protection
  • One footprint; three heights
  • When properly anchored, meets the 2017 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)
Unit of Measure

Cooling Capacity

 N/A 36000 Btu/h

Sensible Cooling Capacity

 N/A 27400 Btu/h

AHRI Numbers

 N/A 6892377

Heating Capacity (47°F)

 N/A 32200 Btu/h

Heating Capacity (17°F)

 N/A 20400 Btu/h

Sound Level

 N/A 78 dB

Voltage

 N/A 208 to 230 V

Phase

 N/A 1

Frequency

 N/A 60 Hz

Indoor Blower - Full Load Amps (FLA)

 N/A 3.8 A

Outdoor Fan - Rated Load Amps (RLA)

 N/A 1.4 A

Total Unit Amps

 N/A 21.9 A

Minimum Overcurrent Protection

 N/A 40 A

Minimum Circuit Ampacity

 N/A 26 A

Operating Weight

 N/A 375 lb

Shipping Weight

 N/A 385 lb

System Performance SEER

 N/A 14.0

System Performance EER

 N/A 12.0

System Performance COP (47°F)

 N/A 3.7

System Performance COP (17°F)

 N/A 2.4

System Performance HSPF

 N/A 8.0

Type

 N/A ECM

Wheel (D x W)

 N/A 10 x 8

Cooling

 N/A 1200 ft³/min

Fan

 N/A 1100 ft³/min

Rated Load Amps (RLA)

 N/A 3.8 A

Full Load Amps (FLA)

 N/A 3.8 A

No. Of Speed

 N/A 5

Horsepower

 N/A 1/2 hp

RPM

 N/A 1050

Face Area

 N/A 6.2 ft²

Rows Deep

 N/A 3

Fins per Inch

 N/A 14

Indoor Metering Device Size

 N/A 0.068

Filter Size

 N/A 25 x 25 x 1

Drain Size (NPT)

 N/A 3/4 in

Refrigerant Charge

 N/A 125 oz

Horsepower

 N/A 1/4 hp

RPM

 N/A 1075

Full Load Amps (FLA)

 N/A 1.3 A

Rated Load Amps (RLA)

 N/A 1.3 A

Locked Rotor Amps (LRA)

 N/A 3.0 A

Fan Diameter

 N/A 22 in

Fan Blades

 N/A 4

Outdoor Metering Device Size

 N/A 0.063

Face Area

 N/A 17.0 ft²

Rows Deep

 N/A 1

Fins per Inch

 N/A 24

Quantity

 N/A 1

Type

 N/A Scroll

Stage

 N/A Single

Rated Load Amps (RLA)

 N/A 16.7 A

Locked Rotor Amps (LRA)

 N/A 79.0 A

Depth

 N/A 34 in

Width

 N/A 66 1/2 in

Height

 N/A 35 in

N/A

Standard Features

  • Multi-speed ECM indoor blower motor
  • Quiet horizontal discharge
  • All-aluminum evaporator coil
  • Copper tube/aluminum fin condenser coil
  • Totally enclosed, permanently lubricated condenser fan motor
  • Fully charged system
  • Electric heat kit available as a field-installed option
  • AHRI Certified; ETL Listed

Cabinet Features

  • Heavy-gauge galvanized-steel cabinet with Architectural Gray powder-paint finish
  • Aluminum foil-facing internal insulation reinforced with fiberglass scrim
  • Fully insulated blower compartment with convenient access panels
  • Meets cabinet air leakage requirements when tested in accordance with ASHRAE standard 193
  • Louvered condenser coil protection
  • One footprint for all tonnages

Your access to and use of the Daikin web site is subject to the Terms and Conditions and all applicable laws.