Your access to and use of the Daikin web site is subject to the Terms and Conditions and all applicable laws.

CAD CART (0)
  • Cart is empty
High Efficiency Inverter Heat Pump
  • ComfortNet™ Compatible
  • Up to 21 SEER and 10 HSPF
  • Daikin Inside Variable-Speed Compressor
Unit of Measure

Maximal Cooling Capacity

N/A 35400 Btu/h

Maximal Heating Capacity

N/A 35000 Btu/h

Compressor Type

N/A Swing

Compressor - Rated Load Amps

N/A 27.30 A

Condenser Fan Motor - Horsepower

N/A 1/2 hp

Condenser Fan Motor - Full Load Amps

N/A 2.5 A

Valve Connection Type

N/A Ball Valve

Refrigerant Charge

N/A 272 oz

Superheat at Service Valve

N/A 7-9°F

Subcooling at Service Valve

N/A 7-9°F

Voltage

N/A 208/230 V

Phase

N/A 1

Minimum Circuit Ampacity

N/A 29.8 A

Maximum Overcurrent Protection

N/A 30 A

Min/Max Volts

N/A 197/253 V

Frequency

N/A 60 Hz

Shipping Weight

N/A 305 lb

Equipment Weight

N/A 285 lb

System Performance SEER

N/A 20

System Performance EER

N/A 14

System Performance HSPF

N/A 10.0

Electrical Conduit Size

N/A 1/2 or 3/4 in

Depth

N/A 35 1/2 in

Width

N/A 35 1/2 in

Height

N/A 41 5/8 in

Liquid Line Size (O.D.)

N/A 3/8 in

Suction Line Size (O.D.)

N/A 7/8 in

Liquid Valve Size (O.D.)

N/A 3/8 in

Suction Valve Size (O.D.)

N/A 7/8 in

N/A

Standard Features

  • Daikin variable speed swing and scroll compressors
  • High density foam compressor sound blanket
  • Compatible with Daikin One+ smart thermostat and other Daikin communicating equipment
  • Daikin control algorithmic logic
  • In communicating mode, only two lowvoltage wires to outdoor unit required
  • Diagnostic indicator lights, seven segment LED display, and fault code storage
  • Daikin Inside intelligence for diagnostics
  • Field selectable boost mode increases compressor speed during unusually high loads
  • Quiet DC outdoor fan motor
  • Fully charged for 15’ of tubing length
  • Field installed bi flow filter drier
  • Coil and ambient temperature sensors
  • Suction pressure transducer (in cooling mode)
  • Sweat connection service valves with easy access to gauge ports
  • AHRI Certified; ETL Listed

Cabinet Features

  • Removable grille-style top design compliant with UL 60335-2-40
  • Venturi for increased velocity of airflow Custom Nickel Gray powder-paint finish
  • 500-hour salt-spray tested
  • Wire fan discharge grille
  • Steel louver coil guard
  • Heavy-gauge galvanized-steel cabinet
  • Top and side maintenance access
  • Single-panel access to controls with space provided for field-installed accessories
  • When properly anchored, meets the 2020 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)

Your access to and use of the Daikin web site is subject to the Terms and Conditions and all applicable laws.