Your access to and use of the Daikin web site is subject to the Terms and Conditions and all applicable laws.

CAD CART (0) ▾
  • Cart is empty
  1. Request CAD files
Request Information Add to CAD Cart
Fully multi-position air handling unit with factory disconnect.

With it’s compact and space saving design, the new FXTQ_TAVJUA(D) air handler units are engineered to suit most light commercial and residential applications.

  • At under 46” tall and only 17-1/2” wide up to 3s, the FXTQ_TAVJUA(D) can be installed in tight closet spaces.
  • Designed for zero clearance on three sides and only 24” clearance on the front for service.
  • Sound levels as low as 36 dBA to suit applications in sound sensitive environments
Unit of Measure

Family

 N/A FXTQ_TA

Model Type

 N/A Multi Position AHU

Indoor Unit Type

 N/A Ducted

Heating Capacity

 N/A 60000 Btu/h17.6 kW

Fan Air Flow Rate

 N/A 1800 ft³/min

External Static Pressure

 N/A 0.9 inWc

Sound Pressure Level

 N/A 50 dBA

Power Supply

 N/A 208/230VAC, 60Hz, 1 phase

Minimum Circuit Ampacity

 N/A 8.6 A

Maximum Overcurrent Protection

 N/A 15 A

Voltage

 N/A 240 V

Weight

 N/A 167 lb75.7 kg

Height

 N/A 58 in1473 mm

Width

 N/A 24 1/2 in622 mm

Depth

 N/A 21 in533 mm

Pipe Connections - Liquid

 N/A 3/8 in9.5 mm

Pipe Connections - Gas

 N/A 5/8 in15.9 mm

Pipe Connections - Drain

 N/A 3/4 in19.1 mm

N/A

  • Multi-family
  • Single-family
  • Hotels
  • Offices

    		•

    N/A

    • Expanded capacity lineup, featuring ten models ranging from 3/4 to 5s, with a redesigned unit frame for maximum durability.
    • Fully multi-position air handler capable of upflow, downflow*, horizontal right, and horizontal left installation.
    • A high efficiency, true ECM motor powers the fan to deliver nominal CFM at up to 0.9” w.g. static. An auto fan speed setting will automatically adjust the fan speed through 5 steps based on the load in the space.
    • Wide line up of electric heat (field installed) options from 3kW to 25kW.
    • An auxiliary heat logic features a reduced heater operation deadband and the ability to run both heat pump and auxiliary heat for maximum comfort and performance in the coldest climates. The auxiliary heat can be interlocked with the ambient temperature sensed by the outdoor unit.
    • Designed with less than 2% air leakage when tested in accordance with ASHRAE standard 193.
    • New integrated control board reduces the number of electrical connections required. Quick disconnect control wiring terminals simplify installation.
    • Easily integrate with third party accessories such as a humidifier or economizer with on-board contacts.
    • Up to 200% connection ratio is possible on VRV systems.
    • Available with optional factory installed disconnect (Built to order — model FXTQ_TAVJUD).


      • * Down flow requires field installed optional down flow accessory. (Part number DFK-B/C/D)

    Additional information
      Before purchasing this appliance, read important information about its estimated annual energy consumption, yearly operating cost, or energy efficiency rating that is available from your retailer.

    Cooling Capacity Note

    		 N/A Nominal cooling capacities are based on the following conditions: 80 ºFDB / 67 ºFWB (26.7 ºCDB / 19.4 ºCWB) return air temperature; 95 ºFDB (35 ºCDB) outdoor temperature; 25 ft. (7.6 m) equivalent refrigerant piping

    Heating Capacity Note

    		 N/A Nominal heating capacities are based on the following conditions: 70 ºFDB (21.1 ºCDB) return air temperature; 47 ºFDB / 43 ºFWB (8.3 ºCDB / 6.1 ºCWB) outdoor temperature; 25 ft. (7.6 m) equivalent refrigerant piping

    Your access to and use of the Daikin web site is subject to the Terms and Conditions and all applicable laws.