Print Back
Unit of Measure

Specifications

Compressor Type

 N/A Two-Stage

Condenser Fan Motor Horsepower

 N/A 1 hp

Frequency

 N/A 60 Hz

Voltage

 N/A 208-230 V

Cooling Capacity

 N/A 93000 Btu/h

Heating Capacity

 N/A 82000 Btu/h

Sound Level

 N/A 84 dB

Compressor Rated Load Amps

 N/A 26.9 A

Compressor Locked Rotor Amps

 N/A 164.0 A

Condenser Fan Motor Full Load Amps

 N/A 5.6 A

Valve Connection Type

 N/A Sweat

Refrigerant Charge

 N/A 55 oz

Phase

 N/A 3

Minimum Circuit Ampacity

 N/A 39.2 A

Maximum Overcurrent Protection

 N/A 60 A

Min/Max Volts

 N/A 197/253 V

Nominal Cooling Capacity (Tons)

 N/A 7.5

Series

 N/A DZ11

Refrigerant Used

 N/A R-410A

Shipping Weight

 N/A 355 lb

Dimensions

Depth

 N/A 35 1/2 in

Width

 N/A 35 1/2 in

Height

 N/A 41 1/2 in

Liquid Valve Size O.D.

 N/A 5/8 in

Suction Valve Size O.D.

 N/A 1 3/8 in

Electrical Conduit Size

 N/A 1/2 or 3/4 in

Parallel Unit Minimum Clearance

 N/A 24 in

Unit Minimum Clearance

 N/A 12 in

Unit Top Minimum Clearance

 N/A 60 in

Lower Access Panel Depth

 N/A 4 in

Lower Access Panel Height

 N/A 17 in

Lower Access Panel Width

 N/A 7 in

System Efficiency Metrics

System Performance EER

 N/A 11

Features

N/A Standard Features

  • Energy-efficient compressor with internal pressure relief valve
  • High-capacity, steel-cased, bi-flow heat pump filter drier
  • Liquid refrigerant return protection
  • Check flowrater heating mode expansion device
  • Reliable, time-initiated, temperatureterminated defrost control
  • Low-pressure switch
  • Discharge line muffler
  • Brass liquid and suction line service valves mounted at a 90° angle with sweat connections and service ports
  • High-efficiency copper tube / aluminum fin coil
  • Complies with ASHRAE 90.1-2007
  • AHRI Certified; ETL Listed
Cabinet Features
  • Innovative sound control top design
  • Steel louver coil guard protects coil from damage and adds strength to the unit
  • Heavy-gauge, galvanized-steel cabinet
  • Attractive Nickel Gray powder-paint finish
  • When properly anchored, meets the 2010 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)